High quality polyester glassflake system,
excellent combination of chemical and temperature resistance. Excellent for
sea water environments.
RA 200 Part B (HA 200)
RA 200C
Part A
Conductive version of RA200. Used where
combination of high chemical resistance & conductivity is required or when
chemical environments can attack glassflake.
RA 200C Part B (HA 200)
RA 200P
Part A
Used as a primer for polyester systems and
for priming and sealing of concrete. Excellent as a sealer coat for other
systems.
Excellent resistance to severe chemical,
corrosive and abrasive environments. Ideally suitable for Caustic alkalies,
hypochlorite bleaches & organic solvents. Temp. Res. Max.110 ºC immersed.
RA 300 Part B (HA 300)
RB 300
Part A
Excellent resistance to high temperatures ,
thermal ageing, severe chemical, corrosive and abrasive environments. Ideal
tank lining. Temp. res. Max.125 ºC.
RB 300 Part B (HA 300)
RB 300C
Part A
Conductive version of RB300. Used where
combination of high chemical resistance & conductivity is required or when
chemical environments can attack glassflake.
RB 300C Part B
(HA 300)
RB 300P
Part A
Used as a primer for Vinyl Ester systems and for
priming and sealing of concrete. Excellent as a sealer coat for other
systems.
RB 300P Part B (HA 300)
RC 300
Part A
Excellent adhesion to stainless steel, other
metals & concrete. Superior elasticity & flexibility combined with high
resistance to impact and severe mechanical stress.
RC 300 Part B (HA 300)
RD 300
Part A
Brominated Vinyl Ester offering Max. fire resistancy.
RD 300 Part B (HA 300)
RF 300
Part A
High temperature Novolac Vinyl Ester Glassflake System
Solvent-free, low odour, outstanding moisture
tolerance. Very flexible, excellent chemical & abrasion properties.
RA 500 Part B (HF 500)
RA 500M
Part A
Solvent-free, low odour, outstanding moisture
tolerance. Very flexible & excellent chemical & abrasion properties. Ideal
for Marine & Ballast tank coating and repair. Compatible with coal-tar
epoxies.
RA 500M Part B (HF 500M)
RA 500P
Part A
Excellent moisture tolerant primer for metal
or concrete or as a sealer. For wet blast substrates, UHP Hydroblasting
RA 500P Part B (HF 500)
RA 500UW-HV
Part A
Solvent-free underwater system. Available in
2 versions HV - High Viscosity, LV - Low Viscosity. Main feature: Ease of
application, less paint dispersion.
RA 500UW-HV Part B (HF 500UW-HV)
RA 500UW-LV
Part A
Solvent-free underwater system. Available in
2 versions HV - High Viscosity, LV - Low Viscosity. Main feature: Ease of
application, less paint dispersion.
RA 500UW-LV Part B (HF 500UW-LV)
RA 500UW-F
Part A
Filler and repair compound for application
underwater. For bonding metal, concrete and GRP substrates
RA 500UW-F Part B (HF 500UW-F)
RA 500UW-S
Part A
Adhesive for application underwater. For
bonding metal, concrete and GRP substrates
RA 500UW-S Part B (HF 500UW-S)
RB 500
Part A
FDA approved, excellent for wine & beer tank
lining, very high gloss, hot applied. Very high chemical resistance.
RB 500 Part B (HB 500)
RB 500P
Part A
General purpose solvent-free, low viscosity
epoxy primer. No/low odour.
RB 500P Part B (HA 500)
RC 500GTC
Part A
Epoxy acrylic top-coat system
RC 500GTC Part B (HC 500GTC)
RD 500
Part A
Nuclear, petrochemical and pharmaceutical
industry approved. Easy to apply
RD 500 Part B (HK 500)
RF 500
Part A
Highly chemical/acid resistant (incl. 98%
sulphuric acid), solvent-free, very high gloss.
RF 500 Part B (HG 500)
RG 500
Part A
Outstanding flexibility, good crack bridging,
water-proofing membrane, flexible inter layer.
RG 500 Part B (HJ 500)
RH 500
Part A
High density epoxy filler/metal putty. Rapid
cure, machinable, used with RP500 or RU500 top coats.
RH 500 Part B (HI 500)
RI 500
Part A
Solvent-free, low odour, outstanding moisture
tolerance. Very flexible, excellent chemical & abrasion properties.
RI 500 Part B (HM 500)
RI 500M
Part A
Solvent-free, low odour, outstanding moisture
tolerance. Flexible, excellent chemical & abrasion properties. Ideal for
Marine & Ballast tank coating and repair. Compatible with coal-tar epoxies.
RI 500M Part B (HM 500M)
RI 500M-NB
Part A
As RI 500M but less susceptible to blooming
at low temp.
RI 500M-NB Part B (HM 500M-NB)
RJ 500
Part A
FDA approved, excellent for wine & beer tank
lining, very high gloss, cold applied.
RJ 500 Part B (HL 500)
RK 500
(Single pack product)
Converts the rust into an inert barrier &
primes at the same time. Single pack. Solvented.
RK 500CP
(Single pack product)
Water base rust converter/ primer. Converts
the rust into an inert barrier & primes at the same time. Single pack.
RL 500PF
Part A
Innovative coating, primes & finishes all in
one-coat. Outstanding moisture & surface tolerance. Can be applied on new or
rusty galvanised, metal, concrete etc. Ideal for Pylons, pipe-work, jetties,
pillars.
RL 500PF Part B (HN 500)
RM 500LR
Part A
Good chemical resistance, for
internal/external of buildings, specially for road tunnels with light
reflective properties, fire retardant.
RM 500LR Part B (HQ 500LR)
RN 500FR
(Single pack product)
Water-based acrylic system designed as a
top-coat for cementitus fire protection systems.
RN 500TC
(Single pack product)
Water-based acrylic system is ideal as a UV
resistant , to-coat for epoxy coating systems for tanks, structures in petrochemical,
offshore and power generation industry.
RN 500P
(Single pack product)
Water-based acrylic masonry primer.
RN 500RC
(Single pack product)
Water-based acrylic system, is specifically
design as a roof coating.
RP 500
Part A
Ceramic coating, very hard wearing & abrasion
resistant. Low friction finish to improve efficiency in fluid flow
environments.
RP 500 Part B (HP 500)
RS 500P
Part A
Solvent-free, low odour, outstanding
moisture/surface tolerant properties. A unique primer suitable for any type
of surface preparation e.g. mech. Prep., UHP, grit blast etc. Specially
designed for confine spaces, tank lining.
RS 500P Part B (HR 500P)
RS 500P-TG
Part A
RS 500P Tropical Grade
RS 500P-TG Part B (HR 500P-TG)
RU 500
Part A
Ceramic coating, very hard wearing & abrasion
resistant. Low friction finish to improve efficiency in fluid flow
environments. Much higher temp. & chemical resistance than RP500.
RU 500 Part B (HU 500)
RV 500
Part A
Protection of structures etc from the effect
of high temp. and aggressive chemicals. Resistant to thermal shock.
Generally not for tank lining but for flue stacks, chimneys, pipes etc.
RV 500 Part B (HT 500)
RW 500
Part A
Solvent -free Novolac with very good thermal
and chemical resistance. Specially designed for the most aggressive
combination of high temp. & chemicals in immersed condition. Solvent -free,
substitute of Vinyl Ester.
RW 500 Part B (HW 500)
RX 500GS
Part A
Multi-purpose, odour free, high gloss epoxy
water-base with exceptional adhesion and chemical resistance.
RX 500GS Part B (HX 500GS)
RX 500MT
Part A
Multi-purpose, odour free, satin/matt epoxy
water-base with exceptional adhesion and chemical resistance.
RX 500MT Part B (HX 500MT)
RX 500P
Part A
Multi-purpose, odour free, water-base epoxy
primer with exceptional adhesion to all substrates. Barrier coat/ adhesion
promoter between incompatible systems.
Hard Wearing, extremely flexible, Excellent
Hygienic. Conductive versions available. Paint versions also available
RA 800 Part B (HF 800)
RB 800
Part A
Hard Wearing, Excellent Hygienic. Conductive
versions available.
RB 800 Part B (HA 800)
RB 800P
Part A
Primer for concrete and metals. No
solvents/smell. Ideal for RB 800 flooring systems
RB 800P Part B (HA 800P)
RD 800
Part A
Extremely hard wearing self-levelling
compound. Approved for Food C & Beverage and UK Nuclear Industry.
RD 800 Part B (HC 800)
RG 800
Part A
Hard Wearing, extremely flexible, Excellent
Hygienic. Conductive versions available. Paint versions also available
RG 800 Part B (HH 800)
RH 800
Part A
Clear. Extremely moisture tolerant for green
and freshly laid concrete. Can be used as a sealant for concrete and priming
for secondary coats.
RH 800 Part B (HI 800)
RI 800CRS
Part A
Light duty concrete repair system. Crack
filler and grout. Very good chem resistance. High flexibility. Fast and slow
cure versions available. Low odour solvent free.
RI 800CRS Part B (HJ 800)
RJ 800CRS
Part A
Heavy-duty Epoxy mortar.
RJ 800CRS Part B (HK 800)
RJ 800FC
Part A
Heavy-duty Epoxy mortar. (Fast Cure)
RJ 800FC Part B (HK 800FC)
RK 800 Part A
Anti-slip coating - heavy duty hard wearing
anti-slip coating. Areas of severe slip hazards.
RK 800 Part B (HH 800)
RL 800CRS-HV (Single pack
product)
Easy repair of concrete and masonry systems.
Fast setting. Versions HV - Mortar
- 20 mm
RL 800CRS-LV Part A
Easy repair of concrete and masonry systems.
Fast setting. Versions LV - Self levelling
- 10 mm thickness.
RL 800CRS-LV Part B (HL 800)
RM 800CRS Part A
Designed for sealing, moving or non-moving
cracks and cavities. Liquid coating penetrates cracks to seal hairline
fractures etc. Protects against chloride attack.
RM 800CRS Part B (HL 800)
RN 800CRS
Part A
Low viscosity for crack penetration. Cures to
form flexible and tough finish. Protects against Chloride attack. Penetrates
damaged areas quickly and cures quickly to repair.
RN 800CRS Part B (HN 800)
RP 800
(Single pack product)
Multi-purpose, fast drying, single pack
RS 800
(Single pack product)
Fast drying, single pack, moisture tolerant,
very good resistance to abrasion and UV
RX 800
Part A
Odour free Floor coating, quick drying and
easy application with minimal surface preparation
Can be applied on hot or cold substrates up
to 170 ºC. Temp. resistance up to 550 ºC. Single pack with exceptional
UV/chemical resistance. Surface tolerant (MIO-ZINC) modified. Flair /
Chimney stacks, pipework etc.
RB 900
(Single pack product)
Can be applied on hot or cold substrates up
to 170 ºC. Temp. resistance up to 550 ºC. Single pack with exceptional
UV/chemical resistance. Ideally used as a top-coat/ sealer. Allows tank
lining to cure insitu.
RD 900
Part A
High temperature Solvent-free Glassflake
epoxy.
RD 900 Part B (HD 900)
RE 900
Part A
Renewal compound. A high density, epoxy putty
designed to fill cavities, cracks and heavy pittings.
RE 900 Part B (HE 900)
RF 900
Part A
Ceramic technology, high abrasion/temp.
resistance. Immersed up to 210 ºC.
Solvent-free, low odour, outstanding moisture
tolerance. Very flexible & excellent chemical & abrasion properties. Ideal
for Marine & Ballast tank coating and repair. Compatible with coal-tar
epoxies.
RA 500M Part B
RS 500P
Part A
Solvent-free, non-toxic, fire-retardant
fluorenscenet non-slip floor coating, offering ; scratch/slip
/stain-resistant finish. A unique, extremely hard wearing, attractive system
for any type of surface.
Solvent-free, non-toxic, fire-retardant,
non-slip floor coating, offering ; scratch/slip /stain-resistant finish. A
unique, extremely hard wearing, attractive system for any type of surface.
Diamond-top Part B
Glow-top
Part A
Solvent-free, non-toxic, fire-retardant
fluorenscenet non-slip floor coating, offering ; scratch/slip
/stain-resistant finish. A unique, extremely hard wearing, attractive system
for any type of surface.
Glow-top Part B
Nano-lite
Part A
A light weight polymeric screed/underlay
offering major weight saving benefits (Density < 0.8). Solvent-free,
non-toxic, fire-retardant. Specially designed for shipping and off-shore
markets.
Nano-lite Part A
Pool-fix
Part A
Solvent-free, for repair of swimming pools
Pool-fix Part B
Pool-fix Filler/Grout
Part A
Solvent-free, for repair of swimming pools
Pool-fix Filler/Grout Part B
Pylo-cote
Part A
Epoxy Primer -
Finish System Moisture/Surface Tolerant
