Solvent & Styrene-free
Tank & Pipe Lining Products
Low
Odour &
ECO Friendly
Ideal for High Humidity and Damp
Environments
|
RA 564 being spray applied |
Chemco have developed a
range of chemical resistant pipe and tank lining products that are styrene
and solvent-free.
They
are based on epoxy or epoxy novolac
leading edge technology and can be filled with glassflake and other
specialist
fillers depending on the application. There are significant cost
savings possible at application over
traditional
vinyl ester and polyester systems because;
– They
are non-flammable, styrene-free and do not require special ventilation
equipment during
application.
–
They are
moisture tolerant and work in high humidity ambient conditions and can be
applied onto
damp substrates.
– They are
ideal for
hydro-blast preparation.
– They
are also less prone to failure caused by poor application conditions and
surface preparation.
– They
do not require primers.
– Ambient
application conditions are far less stringent saving money with reduced
“painting downtime”.
|
RA 500
Ideal for
application in high humidity environments.
Excellent chemical resistance.
Will
adhere to damp and sweating substrates.
|
RW 500
Ideal
for flue gas applications up to 220ºC
Exceptional heat and chemical corrosion resistance. |
|
RD 500
Used
in the nuclear industry as a pipe and tank lining product i.e. at Dounreay
Nuclear Power Station.
|
RF 500
Ideal
for highly acidic conditions such as 98%
sulphuric acid.
|
|
RJ 500
FDA approved for food contact applications
Extremely smooth finish that is very easy to clean and
minimises bacterial growth.
The
finish helps reduce batch to batch contamination.
Ideal
for wine and beer applications.
Approved by Bass for beer tank linings. |
RI 500
Ideal
for cost sensitive applications.
Good
application properties in high humidity
environments or onto damp or sweating substrates.
Good
chemical resistance.
|
Chemco also produce a full range of
polyester and vinylester based protective coatings
|
