Chemco Products for Higher
Temperature Process Conditions
Chemco have designed a range of protective coatings that are designed for high
temperature conditions where chemical resistance has been traditionally
difficult to provide. They are easy to apply and require
little surface
preparation.
Temperature Range
Hot
cote™ RA 900
Up to 550 Deg C
Withstands
to 550°C
Can be
applied at temperatures up to 170°C
Single Pack
system
Surface
Tolerant
MIO/Zinc
Technology
Fire
resistant (class 0)
Excellent
chemical protection
UV stable
Weathering
protection
Hot
cote™ RB 900
Up to 550 Deg C
High gloss
top coat/sealer
Veil coat for accelerated curing
In process
post curing
Withstands
to 550°C
Will provide a sealed surface to prevent oxidation
For Process temperatures up to 125
º C wet/immersed and
180
º C dry. Ideally suited for
hot water tanks, condensate returns, hot chemical storage
tanks
etc
Thermal Insulation Product up to 160 Deg C.
Higher temperatures possible.
Experimental product designed to offer very good thermal
insulation properties as well as chemical resistance. Ideally suited for
solving corrosion
under insulation.
Cost effective alternative to thermal metal spray
Solvent-free epoxy novolac imparts
outstanding protection to metal and concrete substrates.
Forms a durable
barrier resistant to abrasion, erosion and thermal
shock.
Ideal tank lining
system, specifically designed for the most aggressive combination of high
temperature and chemical environments in immersed conditions.
Available in
hand/trowel grades for optimum protection from the most aggressive
environments.
Also available in spray grade to offer the customer a complete system’s
solution to hostile cyclic wet and dry chemical
environments.
Recommended for
internal protection of tanks, vessels, separators, flue gas desulphurisation
units, chimneys, pipes and equipment operating at high temperature.
Two pack epoxy
composite incorporating Cerpofix™ high performance technology.
Epoxy coating
formulated with ceramic technology to withstand hard-wearing and abrasive
environments. It will help prevent damage created by thermal shock and
cavitation.
Forms an impermeable
barrier, suitable for repair work on all types of fluid flow equipment and
for tank linings.
Imparts excellent
chemical and thermal resistance properties with a low friction finish to
offer improved pump/equipment efficiency and reduces energy consumption.
Specifically
formulated to resist high temperature, aggressive chemical and fluid flow
environments: -
. Pumps
.Castings
. Cracked castings
. Pipes
.Impellers/Propellers . Fan
Blades
. Heat Exchanger .Tanks
. Valves
.
Tube Sheets .Diffuers
. Bow Thresters
Deep pitting and
voids can be filled quickly with RW 532/RW 508.
RW 532/RW 508 is
fully machinable and has excellent adhesion with RU 500
User-friendly and
easy to apply.
Effective one-coat
system which can be easily over-coated if required.
Designed as a
solution for solving
corrosion under insulation.
This development product insulates and protects pipework and process
equipment from corrosion in a continuous phase. For further information
please contact sales@chemcoint.com
A cost effective
alternative to thermal metal spray.
Chemco
also manufacture a range of traditional polyester and vinylester repair
products.
