Diver-cote RA 500UW-HV
Two pack, solvent-free, high viscosity epoxy underwater system.
Diver-cote™ RA 500UW-HV is a solvent-free, wet tolerant, high viscosity underwater coating/filler which has been reinforced with glassflake and is recommended to be utilised for a wide range or underwater applications including the protection of risers, pipes and structures below the splash zone.
Primary Features:
- Solvent-free (odourless), wet tolerant, high viscocity underwater coating/filler
- Glassflake properties form an impermeable barrier to protect against corrosion
- Repairs deep cracks, holes, leaks, chips and large defects with minimum effort and downtime
- Specifically designed for application underwater or in very wet areas
- No overcoating limitations
- Ideal for use on wet and saturated metal and concrete and for hand prepared or hydro-blasted surfaces
- Offers minimal dispersion during application, which in turn:
- reduces potential contamination of the environment
- helps to keep expensive diving suits and equipment clean
- improves the controllability and accuracy as the diver's vision is clearer for a longer period of time
- improves efficiency and productivity
- Will reduce the risk of MIC (Microbiological Induced Corrosion) and SRB (Sulphate Reducing Bacteria) as it doesnt not contain the food ingredients contained in traditional solvent-borne systems which bacteria thrives on
- Exhibits long-term resistance to the marine environment
- Ideal product for use with other underwater application products such as Diver-stix™ and Diver-filler™
Data Sheets
Below are the relevant data sheets relating to RA 500UW-HV. Items with a padlock require you to log into your account.
Related Documents
Below are the relevant documents relating to RA 500UW-HV. Items with a padlock require you to log into your account.
Document/s |
---|
Flyer - Diver-cote |
Flyer - Underwater Coating Systems |
Case Studies |
RA 500UW-HV's Properties
Primary duties | High viscosity underwater coating system / filler |
---|---|
Primary characteristics | Designed for application under water |
Solvent-free | √ |
Wet-tolerant | √ |
Glassflake | √ |
Low/No odour | √ |
Maximum humidity | N/A% |
Volume solids | 100% |
UV resistant | |
Maximum immersed temperature | 60°C |
Maximum non-immersed temperature | °C |
Minimum time to touch dry | 6 hrs |
Maximum overcoat time | Unlimited |
Typical dry film thickness (dft) per coat | 1000-5000µ |
Colour range available | Limited range of colours is available |
RA 500UW-HV's Case Histories
The table below shows the 5 most recent case histories for this product. You can view the entire case history for this product by clicking here.
Company | Location | Job Description | Industry | Date of Job |
---|---|---|---|---|
DG Diving Group | Finland | Underwater Repair | Industrial | 04/2018 |
Eleazar General & Industrial Supplies | Trinidad & Tobago | Underwater Repair | Industrial | 01/2018 |
Alfa Diving | Netherlands | Jetty Refurbishment | Industrial | 09/2017 |
CSC (SEA) | Singapore | Underwater Repair | Marine | 08/2017 |
DG Diving Group | Finland | Underwater Repair | Industrial | 07/2017 |
RA 500UW-HV's Related Case Studies
The table below shows the most recent case studies for this product.
Company/Industry | Location | Date of Job |
---|---|---|
Underwater Bridge Piles Repair - Courtesy of CSC Australia | Australia | 07-2009 |
RA 500UW-HV's Related Photo Galleries
Click any of the gallery links to start browsing the photo gallery.
RA 500UW-HV's Related Videos
The table below shows the most recent videos for this product.
Video |
---|
Applying Diver-cote™ RA 500UW-LV Underwater |
Applying Diver-cote™ to an Underwater Pipe |